(+86) 760 8996 7810 sales@nice-rapidtooling.com

Collectible toys are popular with fans and collectors, and having a mold of your favorite toy can be a fun and unique addition to your collection. Mold-making can be challenging, but it can be a rewarding experience with suitable materials and techniques. One of the best mold-making materials is silicone rubber, which offers several advantages over other materials. This article will discuss the steps to create a mold for a collectible toy using silicone rubber for mold making.

These steps describe how to create a mold for a collectible toy using silicone rubber.


The first step in making a mold for a collectible toy is to prepare the toy and the workspace. The toy should be thoroughly cleaned and free of any debris or dust that could interfere with mold-making. The workspace should also be clean and free of any distractions that could affect the final product.

Creating the Master Model

The next step is to create the master model, a three-dimensional replica of the toy used to create the mold. The master model should be made of a material that can be removed from the mold without damaging it, such as wax, clay, or a rubber-like material. There are several methods to create a master model, including sculpting, 3D printing, or using a cast of the original toy.

Mixing the Silicone Rubber

Once the master model is complete, it’s time to mix the silicone rubber. Silicone rubber for mold making comes in two parts, a base, and a catalyst. These two parts should be mixed thoroughly according to the manufacturer’s instructions, ensuring that the ratio of base to catalyst is correct. Mixing the silicone rubber thoroughly is the best way to ensure that it cures properly and the final mold is of high quality.

Silicone teether toys

Silicone teether toys

Pouring the Silicone Rubber into the Mold

Once the silicone rubber is mixed, it should be poured into the mold, making sure to fill all the nooks and crannies of the master model. The mold should be left to cure for the amount of time recommended by the manufacturer, which can range from a few hours to several days, depending on the silicone rubber used.

Removing the Master Model and Cleaning the Mold

Once the silicone rubber is fully cured, the master model can be removed from the mold, leaving a negative impression of the toy. The mold should then be thoroughly cleaned to remove any residue from the master model and prepare it for use.

Casting the Toy

Finally, it is time to cast the toy. A casting material, like resin or plastic, can be poured into the mold and cured. Once the casting material is fully cured, the toy can be removed from the mold, completing the process.

The Summary

Making a mold for a collectible toy using silicone rubber for mold making is a fun and rewarding experience. The process involves several steps:

  • Preparation
  • Creating the master model
  • Mixing the silicone rubber
  • Pouring the silicone rubber into the mold
  • Removing the master model and cleaning the mold
  • Casting the toy

With the right materials and techniques, anyone can create a mold for a collectible toy and take their passion for collectibles to the next level.